Connecting The Lan Cable - Oce fx2081 User Manual

Connecting the LAN cable

In order to use the network features you must connect your machne to your LAN
and adjust the approprate settngs.
To connect the machne to your LAN, a 10BASE-T or 100BASE-TX LAN cable (Cat-
egory 5) s requred.
NOTE
The LAN cable s not ncluded wth ths product.
1
Turn your machne off and unplug the power cord.
2
Plug one end of the LAN cable nto the LAN connector on the left sde of the
machne.
3
Plug the other end of the LAN cable nto the 10Base-T/100Base-TX Ethernet
hub.
4
Plug the power cord nto the wall outlet and turn your machne on.
1-4 c
onnectinG the
LINK lamp:
Illuminates when connected to the LAN.
LAN Connector
ACTIVITY lamp:
Blinks when there is data traffic
on the LAN.
Connect to the Ethernet hub.
Lan
cabLe
PH ON
E1
PH ON
E2
LIN E
LAN cable:
10Base-T/100Base-TX cable
RJ-45 connector