Oce fx2081 User Manual page 172

4
Clck "Browse...".
5
Browse the computer and specfy the shared folder to regster.
6
Clck "OK".
7
Clck the lst button n "Prnter" and specfy a prnter regstered on the com-
puter.
8
Enter a prnter name n "Name".
The regstered name wll be dsplayed on the machne control panel.
9
Enter the account and password for loggng n to the shared folder n each field.
NOTE
• A prnter has margns where no prnt s allowed. Dependng on the prnter beng
used, the prnted document sze may be automatcally reduced, because the docu-
ment data exceeds the margns.
• To prevent ths, you should specfy upper/lower and rght/left margns n advance,
whch are not ncluded n the prntng area, so that the prnter can prnt the
document data except for the preset margns.
• To specfy the margns, clck the [Margn...] button, and specfy the upper, lower,
rght and left margns on the "Margn detal settngs" screen.
Editing or deleting an existing folder
1
See "Openng the envronment settng" on page 5-17 and open the settng
screen.
2
Clck the "Folder" Tab.
3
Select the folder to edt or delete.
4
To edt the folder, clck [Regster/Edt] and overwrte the current settng. Then
clck [OK].
To delete the folder, clck [Erase].
5-18 o S
ce can to
P M
rint onitor