Oce fx2081 User Manual page 129

Items
Clent Port No.
InfoMontor Port No.
Scan to Prnt Montor
Port No.
[Intalze]
3
Configure the settngs, then clck [Save] to save the settngs.
4
If you entered or changed the "DHCP Settng", "IP Address", "Subnet Mask",
"HTTP Port No.", "Clent Port No.", "InfoMontor Port No." or "Scan to Prnt
Montor Port No.", reboot the machne to actvate the new settngs. To reboot
the machne, press [OD Shutdown] and turn the machne "Off" and after three
or more seconds, turn the machne back "On".
Descrptons
Select the UDP port number used for automatcally
searchng "OfficeDrector" when nstallng the "OfficeD-
rector" prnter.
Normally, set to "60000".
Select the UDP port number used when "OfficeDrector"
sends notficaton of newly arrved faxes etc. to "Info-
Montor".
Normally, set to "61000".
To use the "Scan to Prnt" functon, enter the same port
number wth "Scan to Prnt Montor" here.
Normally, set to "62000".
Intalzes the TCP/IP settngs. The settngs wll return
to the factory default settng.
n
etwork
c 4-33
onfiGuration
1
2
3
4
5
6
7
8
9
10
11
12
13
AI