Oce fx2081 User Manual page 186

Phenomenon Devce to check
Cannot Computer
transmt/
receve a fax.
Machne
Network
perpheral
devces (ex.
LAN hub,
router)
6-4 w o
indowS
Check pont
Check f the LAN cable s
connected.
Check f the LAN cable s
damaged.
Check f the network card
(LAN card) s damaged.
Check to make sure that the
system memory s sufficent.
Check f the power s ON.
Check f the LAN cable s
connected.
Check f the LAN cable s
damaged.
Check f the phone lne cable
s connected.
Check f the phone lne cable
s damaged.
Check f the communcaton
lne settngs (dal or push)
are correct.
Check f an advanced fax
functon (ex. Block Junk
Fax) has not been set.
Check f the network set-
tngs are correct.
Check f the power s ON.
Check f the LAN cable s
connected.
Check f the LAN cable s
damaged.
Check f the network perph-
eral devce s damaged.
Check f the network set-
tngs are correct.
Peration errorS
Countermeasure
Check the LAN cable connecton and con-
nect correctly.
Replace the LAN cable.
Replace the network card.
Make sure you have the requred memory
space avalable on your computer. If not,
please add memory. If multple software
applcatons or unnecessary resdent
software are runnng, ext them.
Turn ON the power.
Check the LAN cable connecton and con-
nect correctly.
Replace the LAN cable.
Check the phone lne cable connecton and
connect correctly.
Replace the phone lne cable.
Check the communcaton lne and set
correctly.
Refer to Chapter 5 "Advanced Fax Func-
tons" n the MFP User's Guide and
change these settngs.
Configure the network settngs correctly
(refer to page 1-5).
Turn ON the power.
Check the LAN cable connecton and con-
nect correctly.
Replace the LAN cable.
Connect the LAN cable to another port on
the devce and make sure t operates cor-
rectly. If t fals to operate, please replace
the devce.
Refer to the operatonal manual of the
devce and configure the network settngs
correctly.