Oce fx2081 User Manual page 189

Printing errors
Phenomenon Devce to check
Cannot prnt Computer
a document
Machne
Network
perpheral
devces (ex.
LAN hub,
router)
Settng
Check pont
Check f the LAN cable s
connected.
Check f the LAN cable s
damaged.
Check f the network card
(LAN card) s damaged.
Check to make sure that the
system memory s sufficent.
Check f the power s ON.
Check f paper s loaded.
Check f the drum car-
trdge or toner cartrdge s
nstalled.
Check f the LAN cable s
connected.
Check f the LAN cable s
damaged.
Check f the network set-
tngs are correct.
Check f the power s ON.
Check f the LAN cable s
connected.
Check f the LAN cable s
damaged.
Check f the network perph-
eral devce s damaged.
Check f the network set-
tngs are correct.
Check that your computer
nformaton s regstered n
"User Regstraton" field.
(When the "User Access /
Cost Accountng" settng
for Prnt Mode s actve,
the machne does not prnt
the document created by a
OfficeDrector user wthout
"PC Informaton".)
Countermeasure
Check the LAN cable connecton and con-
nect correctly.
Replace the LAN cable.
Replace the network card.
· Make sure you have the requred mem-
ory space avalable on your computer. If
not, please add memory.
· If multple software applcatons or
unnecessary resdent software are run-
nng, ext them.
Turn ON the power.
Load paper properly.
Install the drum cartrdge or toner car-
trdge correctly.
Check the LAN cable connecton and con-
nect correctly.
Replace the LAN cable.
Configure the network settngs correctly
(refer to page 1-5).
Turn ON the power.
Check the LAN cable connecton and con-
nect correctly.
Replace the LAN cable.
Connect the LAN cable to another port on
the devce and make sure t operates cor-
rectly. If t fals to operate, please replace
the devce.
Refer to the operatonal manual of the
devce and configure the network settngs
correctly.
See "User Regstraton" on page 3-3 and
enter the "PC Informaton" of the user.
To check whether the "User Access / Cost
Accountng" settng for Prnt Mode s
actve, press <Settng>, [Lst], [Settngs
Lst], [System Settngs] and [Yes] to prnt
out the machne's settngs, and check that
"Prnt" underneath "User Access / Cost
Accountng" s set ON.
P
rintinG errorS
1
2
3
5
6
7
8
9
10
11
12
13
AI
6-7