Set-Up; Connecting The Printer Cable - Oce OP1030 Operation Manual

2. Set-up

2-1 Connecting the printer cable

To connect the printer directly to your computer, use either a parallel
cable or USB cable.
CAUTION: ALWAYS turn the main switch to the printer Off BEFORE
connecting the printer cable.
1 Turn the main switch located on the right side of the printer
Off and then turn the power off to your computer as well.
2 Connect the printer cable to the parallel interface connector
or USB interface connector located at the back of the right
side of the printer.
4
Connect the other end of the printer cable to the parallel
3
interface connector or USB interface connector on your
computer.
4 Turn the main switch to the printer back On.
* For details on printer interface setup, see "Functions
Edition".