Subnet Mask - Oce fx2081 User Manual

Subnet Mask

The Subnet Mask specfies the IP address range of the subnet.
NOTE
If your server s DHCP complant, the subnet mask wll be assgned automatcally
and t cannot be edted. If the DHCP server s not nstalled on your network, you
can assgn a Subnet mask manually as descrbed below.
To assgn a Subnet mask manually:
1
Open the TCP/IP settng menu dsplay. (See page 1-5.)
2
Press [DHCP Settng], then press [OFF] and [Enter].
3
Press [Subnet Mask].
4
Enter the approprate IP address of the subnet mask usng the numerc keys.
Press the arrow keys to navgate the IP address fields. Press the [Clear] to
delete a number.
5
Press [Enter]. The dsplay returns to the TCP/IP settng menu.
You may configure addtonal settngs.
To return to the Standby mode, press <Reset>.
6
After you have regstered the network settngs, please reboot the machne. To
reboot the machne, press <Settng>, [OD Shutdown] and turn the machne
"Off" and after three or more seconds, turn the machne back "On".
tcP/iP
SettinGS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
1-9