Mtest:rmode:waveforms - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:MTESt:RMODe:WAVeforms

Command Syntax
:MTESt:RMODe:WAVeforms <count>
<count> ::= number of waveforms in NR1 format
When the :MTESt:RMODe command is set to WAVeforms, the
:MTESt:RMODe:WAVeforms command sets the number of waveform
acquisitions that are mask tested.
Query Syntax
:MTESt:RMODe:WAVeforms?
The :MTESt:RMODe:WAVeforms? query returns the number of waveforms
currently set.
Return Format
<count><NL>
<count> ::= number of waveforms in NR1 format
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
from 1 to 2,000,000,000
from 1 to 2,000,000,000
"Introduction to :MTESt Commands"
":MTESt:RMODe" on page 526
:MTESt Commands
on page 509
23
533