Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 196

6
Root (:) Commands
:AUToscale:CHANnels
Command Syntax
:AUToscale:CHANnels <value>
<value> ::= {ALL | DISPlayed}
The :AUTOscale:CHANnels command specifies which channels will be
displayed on subsequent :AUToscales.
• When ALL is selected, all channels that meet the requirements of
• When DISPlayed is selected, only the channels that are turned on are
Use the :VIEW or :BLANk root commands to turn channels on or off.
Query Syntax
:AUToscale:CHANnels?
The :AUToscale:CHANnels? query returns the autoscale channels setting.
Return Format
<value><NL>
<value> ::= {ALL | DISP}
See Also •
•
•
•
•
196
(see page 1208)
:AUToscale will be displayed.
autoscaled.
"Introduction to Root (:) Commands"
":AUToscale" on page 193
":AUToscale:AMODE"
":VIEW" on page 226
":BLANk" on page 198
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 190
on page 195