Display:lablist - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

14
:DISPlay Commands

:DISPlay:LABList

Command Syntax
:DISPlay:LABList <binary block data>
<binary block> ::= an ordered list of up to 75 labels, a maximum of 10
The :DISPlay:LABList command adds labels to the label list. Labels are
added in alphabetical order.
Labels that begin with the same alphabetic base string followed by decimal digits are
N O T E
considered duplicate labels. Duplicate labels are not added to the label list. For example, if
label "A0" is in the list and you try to add a new label called "A123456789", the new label is
not added.
Query Syntax
:DISPlay:LABList?
The :DISPlay:LABList? query returns the label list.
Return Format
<binary block><NL>
<binary block> ::= an ordered list of up to 75 labels, a maximum of 10
See Also
•
•
•
•
•
318
(see page 1208)
characters each, separated by newline characters.
characters each, separated by newline characters.
"Introduction to :DISPlay Commands"
":DISPlay:LABel" on page 317
":CHANnel<n>:LABel"
":DIGital<d>:LABel" on page 304
":BUS<n>:LABel" on page 250
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 310
on page 271