Channel<N>:Coupling - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual
Oscilloscopes
Hide thumbs
Also See for InfiniiVision 4000 X-Series:
- User manual (486 pages) ,
- User manual (488 pages)
Table of Contents
Advertisement
10
:CHANnel<n> Commands
:CHANnel<n>:COUPling
(see
page
1208)
Command Syntax
:CHANnel<n>:COUPling <coupling>
<coupling> ::= {AC | DC}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:COUPling command selects the input coupling for the
specified channel. The coupling for each analog channel can be set to AC
or DC.
Query Syntax
:CHANnel<n>:COUPling?
The :CHANnel<n>:COUPling? query returns the current coupling for the
specified channel.
Return Format
<coupling value><NL>
<coupling value> ::= {AC | DC}
See Also
•
"Introduction to :CHANnel<n> Commands"
on page 264
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
267
Advertisement
Chapters
Table of Contents
