What's New In Version 3.01 - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

What's New in Version 3.01

New features in version 3.01 of the InfiniiVision 4000 X- Series oscilloscope
software are:
• Ability to turn reference waveform locations on or off and view their
More detailed descriptions of the new and changed commands appear
below.
Changed
Commands
Command
:BLANk (see
:STATus (see
:VIEW (see
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
status using the :VIEW, :BLANk, and :STATus commands.
page 198)
page 223)
page 226)
Differences
You can now use the WMEMory<r> source parameter to turn
off the display of a reference waveform location.
You can now use the WMEMory<r> source parameter to view
the display status of a reference waveform location.
You can now use the WMEMory<r> source parameter to turn on
the display of a reference waveform location.
1
What's New
35