Sbus<N>:M1553:Trigger:rta - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:M1553:TRIGger:RTA
Command Syntax
:SBUS<n>:M1553:TRIGger:RTA <value>
<value> ::= 5-bit integer in decimal, <nondecimal>, or
<nondecimal> ::= #Hnn where n ::= {0,..,9|A,..,F}
<string> ::= "0xnn" where n::= {0,..,9|A,..,F}
The :SBUS<n>:M1553:TRIGger:RTA command sets the Remote Terminal
Address (RTA) to trigger on when the trigger type has been set to RTA or
RTA11 (using the :SBUS<n>:M1553:TRIGger:TYPE command).
To set the RTA value to don't cares (0xXX), set the value to - 1.
Query Syntax
:SBUS<n>:M1553:TRIGger:RTA?
The :SBUS<n>:M1553:TRIGger:RTA? query returns the RTA value.
Return Format
<value><NL> in decimal format
See Also
•
•
752
(see page 1208)
<string> from 0-31
"Introduction to :TRIGger Commands"
":SBUS<n>:M1553:TRIGger:TYPE"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 935
on page 753