Digital<D>:Display - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:DIGital<d>:DISPlay
Command Syntax
:DIGital<d>:DISPlay <display>
<d> ::= 0 to (# digital channels - 1) in NR1 format
<display> ::= {{1 | ON} | {0 | OFF}}
The :DIGital<d>:DISPlay command turns digital display on or off for the
specified channel.
This command is only valid for the MSO models.
N O T E
Query Syntax
:DIGital<d>:DISPlay?
The :DIGital<d>:DISPlay? query returns the current digital display setting
for the specified channel.
Return Format
<display><NL>
<display> ::= {0 | 1}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :DIGital<d> Commands"
":POD<n>:DISPlay" on page 543
":CHANnel<n>:DISPlay"
":VIEW" on page 226
":BLANk" on page 198
":STATus" on page 223
on page 301
on page 268
:DIGital<d> Commands
303
13