Sbus<N>:Lin:parity - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SBUS<n>:LIN:PARity
Command Syntax
:SBUS<n>:LIN:PARity <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<n>:LIN:PARity command determines whether the parity bits are
included as the most significant bits (MSB) in the display of the Frame Id
field in the LIN decode bus.
Query Syntax
:SBUS<n>:LIN:PARity?
The :SBUS<n>:LIN:PARity? query returns the current LIN parity bits
display setting of the serial decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors
•
See Also •
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:LIN Commands"
on page 1169
on page 645
on page 733
28
:SBUS<n> Commands
735