Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 441

:MEASure:NEDGes
Command Syntax
:MEASure:NEDGes [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:NEDGes command installs a falling edge count measurement
on screen. If the optional source parameter is not specified, the current
source is measured.
This command is not available if the source is FFT (Fast Fourier Transform).
N O T E
Query Syntax
:MEASure:NEDGes? [<source>]
The :MEASure:NEDGes? query measures and returns the on- screen falling
edge count.
Return Format
<value><NL>
<value> ::= the falling edge count in NR3 format
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :MEASure Commands"
":MEASure:SOURce"
on page 420
on page 458
21
:MEASure Commands
441