Trigger:delay:tdelay:time - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

32
:TRIGger Commands

:TRIGger:DELay:TDELay:TIME

Command Syntax
:TRIGger:DELay:TDELay:TIME <time_value>
<time_value> ::= time in seconds in NR3 format
The :TRIGger:DELay:TDELay:TIME command sets the delay time between
the arming edge and the trigger edge in the Edge Then Edge trigger. The
time is in seconds and must be from 4 ns to 10 s.
Query Syntax
:TRIGger:DELay:TDELay:TIME?
The :TRIGger:DELay:TDELay:TIME? query returns current delay time
setting.
Return Format
<time value><NL>
<time_value> ::= time in seconds in NR3 format
See Also
•
•
•
950
(see page 1208)
"Introduction to :TRIGger Commands"
":TRIGger:DELay:TRIGger:SLOPe"
":TRIGger:DELay:TRIGger:COUNt"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 935
on page 952
on page 951