Measure:dual:vpp; Measure:dual:vrms; Measure:dutycycle - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

Table 17 :MEASure Commands Summary (continued)
Command

:MEASure:DUAL:VPP

[<source1>][,<source2
>] (see page 436)

:MEASure:DUAL:VRMS

[<interval>]
[,<type>]
[,<source1>][,<source
2>] (see page 437)

:MEASure:DUTYcycle

[<source>] (see
page 438)
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Query
:MEASure:DUAL:VPP?
[<source1>][,<source2
>] (see page 436)
:MEASure:DUAL:VRMS?
[<interval>]
[,<type>]
[,<source1>][,<source
2>] (see page 437)
:MEASure:DUTYcycle?
[<source>] (see
page 438)
Commands Quick Reference
Options and Query Returns
<source1>,<source2> ::=
CHANnel<n> with N2820A probe
connected
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= voltage
peak-to-peak of the selected
waveform in NR3 format
<interval> ::= {CYCLe | DISPlay}
<type> ::= {AC | DC}
<source1>,<source2> ::=
CHANnel<n> with N2820A probe
connected
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= calculated
RMS voltage in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion<m> |
MATH<m> | WMEMory<r>} for MSO
models
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= ratio of
positive pulse width to period in
NR3 format
4
93