Sbus<N>:Usb:trigger:sc - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:SC
(see page 1208)
Command
:SBUS<n>:USB:TRIGger:SC <string>
SyntaxS
<string> ::= "n" where n ::= {0 | 1 | X}
<string> ::= "0xn" where n ::= {0 | 1 | X | $}
The :SBUS<n>:USB:TRIGger:SC command specifies the 1- bit SC portion of
the trigger for the selected bus, in binary or hex.
Query Syntax
:SBUS<n>:USB:TRIGger:SC?
The :SBUS<n>:USB:TRIGger:SC? query returns the specified SC portion of
the trigger.
Return Format
<string><NL>
<string> ::= "nnnn" where n ::= {0 | 1 | X}
See Also • ":SBUS<n>:USB:TRIGger:PID:SPECial" on page 812
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 815