Search:serial:iic:qualifier - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:SERial:IIC:QUALifier

Command Syntax
:SEARch:SERial:IIC:QUALifier <value>
<value> ::= {EQUal | NOTequal | LESSthan | GREaterthan}
The :SEARch:SERial:IIC:QUALifier command specifies the data value
qualifier used when searching for IIC EEPROM data read events.
Query Syntax
:SEARch:SERial:IIC:QUALifier?
The :SEARch:SERial:IIC:QUALifier? query returns the current data value
qualifier setting.
Return Format
<value><NL>
<value> ::= {EQU | NOT | LESS | GRE}
See Also
•
•
•
872
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:IIC:MODE"
":SEARch:SERial:IIC:PATTern:DATA"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 867
on page 870