Trigger:glitch:range - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:TRIGger:GLITch:RANGe

Command Syntax
:TRIGger:GLITch:RANGe <less_than_time>[suffix],
<less_than_time> ::= (15 ns - 10 seconds) in NR3 format
<greater_than_time> ::= (10 ns - 9.99 seconds) in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
The :TRIGger:GLITch:RANGe command sets the pulse width duration for
the selected :TRIGger:GLITch:SOURce. You can enter the parameters in any
order — the smaller value becomes the <greater_than_time> and the larger
value becomes the <less_than_time>.
Query Syntax
:TRIGger:GLITch:RANGe?
The :TRIGger:GLITch:RANGe? query returns the pulse width duration time
for :TRIGger:GLITch:SOURce.
Return Format
<less_than_time>,<greater_than_time><NL>
See Also •
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
<greater_than_time>[suffix]
"Introduction to :TRIGger Commands"
":TRIGger:GLITch:SOURce"
":TRIGger:GLITch:QUALifier"
":TRIGger:MODE" on page 944
on page 935
on page 974
on page 972
32
:TRIGger Commands
973