Trigger:runt:source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:TRIGger:RUNT:SOURce

Command Syntax
:TRIGger:RUNT:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:RUNT:SOURce command selects the channel used to produce
the trigger.
Query Syntax
:TRIGger:RUNT:SOURce?
The :TRIGger:RUNT:SOURce? query returns the current runt trigger source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :TRIGger Commands"
":TRIGger:RUNT:POLarity"
on page 935
on page 987
32
:TRIGger Commands
989