29
:SEARch Commands
:SEARch:SERial:FLEXray:DATA
Command Syntax
:SEARch:SERial:FLEXray:DATA <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X }
The :SEARch:SERial:FLEXray:DATA command specifies the data value to
find when searching for FlexRay frames.
The length of the data value is specified by the
:SEARch:SERial:FLEXray:DATA:LENGth command.
Query Syntax
:SEARch:SERial:FLEXray:DATA?
The :SEARch:SERial:FLEXray:DATA? query returns the current data value
setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X }
See Also
•
•
•
856
(see
page
1208)
Chapter
29, ":SEARch Commands," starting on page 817
":SEARch:SERial:FLEXray:MODE"
":SEARch:SERial:FLEXray:DATA:LENGth"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 859
on page 857