Print - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:PRINt

Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | PRINter1 | BMP8bit
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used.
See Also
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
| BMP | PNG | NOFactors | FACTors}
"Introduction to Root (:) Commands"
"Introduction to :HARDcopy Commands"
":HARDcopy:FACTors"
":HARDcopy:GRAYscale"
":DISPlay:DATA" on page 316
on page 190
on page 370
on page 373
on page 1133
6
Root (:) Commands
219