Sbus<N>:Usb:trigger:port - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:TRIGger:PORT
Command Syntax
:SBUS<n>:USB:TRIGger:PORT <string>
<string> ::= "nnnnnnn" where n ::= {0 | 1 | X}
<string> ::= "0xnn" where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:USB:TRIGger:PORT command specifies the 7- bit Port portion
of the trigger for the selected bus, in binary or hex.
Query Syntax
:SBUS<n>:USB:TRIGger:PORT?
The :SBUS<n>:USB:TRIGger:PORT? query returns the specified Port portion
of the trigger.
Return Format
<string><NL>
<string> ::= "nnnnnnn" where n ::= {0 | 1 | X}
See Also •
814
(see page 1208)
":SBUS<n>:USB:TRIGger:PID:SPECial"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 812