Power:transient:inew - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:POWer:TRANsient:INEW

Command Syntax
:POWer:TRANsient:INEW <value>[suffix]
<value> ::= New current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:TRANsient:INEW command to specify the new load current
value. The new load current will be used as a reference and to trigger the
oscilloscope.
Query Syntax
:POWer:TRANsient:INEW?
The :POWer:TRANsient:INEW query returns the new load current value.
Return Format
<value><NL>
<value> ::= New current value in NR3 format
See Also •
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":POWer:TRANsient:APPLy"
":POWer:TRANsient:EXIT"
":POWer:TRANsient:IINitial"
":POWer:TRANsient:NEXT"
on page 608
on page 609
on page 610
on page 612
25
:POWer Commands
611