Set Ssh Hostkey - Enterasys D-Series Cli Reference Manual

Parameters
enable | disable
reinitialize
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable SSH:
D2(su)->set ssh disable

set ssh hostkey

Use this command to set or reinitialize new SSH authentication keys.
Syntax
set ssh hostkey [reinitialize]
Parameters
reinitialize
Defaults
If reinitialize is not specified, the user must supply SSH authentication key values.
Mode
Switch command, read‐write.
Example
This example shows how to regenerate SSH keys:
D2(su)->set ssh hostkey reinitialize
Enables or disables SSH, or reinitializes the SSH server.
Reinitializes the SSH server.
(Optional) Reinitializes the server host authentication keys.
set ssh hostkey
Enterasys D-Series CLI Reference 17-75