Set Ssh Hostkey - Enterasys SECURESTACK C3 Configuration Manual

Parameters
enable | disable
reinitialize
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable SSH:
C3(su)->set ssh disable

set ssh hostkey

Use this command to reinitialize new SSH authentication keys.
Syntax
set ssh hostkey reinitialize
Parameters
reinitialize
Defaults
None
Mode
Switch command, read‐write.
Example
This example shows how to regenerate SSH keys:
C3(su)->set ssh hostkey reinitialize
Enables or disables SSH, or reinitializes the SSH server.
Reinitializes the SSH server.
Reinitializes the server host authentication keys.
SecureStack C3 Configuration Guide 26-81
set ssh hostkey