Show Cos Port-Type - Enterasys D-Series Cli Reference Manual

show cos port-type

Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the CoS configuration for all entries except entries 0‐7:
D2(su)->clear cos all-entries
show cos port-type
Use this command to display Class of Service port type configurations.
Syntax
show cos port-type [irl [port-type]]
Parameters
irl
port‐type
Defaults
If no parameters are specified, inbound rate limiting information for all port types is displayed.
Mode
Switch command, read‐only.
Usage
The D2 implementation provides one default port type (0) for designating available inbound rate
limiting resources. Port type 0 includes all ports.
The port type 0 description is "D2100 IRL," which indicates that this port type provides a
maximum of 100 inbound rate limiting resources per port group.
Example
This example shows inbound rate limiting information for port type 0.
D2(su)->show cos port-type irl 0
Number of resources:
irl = inbound rate limiter(s)
Index
-----
0
11-32 Policy Classification Configuration
(Optional) Displays inbound rate limiting information.
(Optional) Displays information for a specific port type.
Port type Number of
description limiters
------------ ---------
D2 100 IRL 100
Supported rate types:
Kbps = kilobits per second
Supported Eligible
rate type ports
--------- -----------------
fe
kbps .1.1-48
Unselected
ports
-----------------
fe
.1.1-4