Configuring Diffserv Policies And Assigning Classes; Purpose; Commands; Show Diffserv Policy - Enterasys D-Series Cli Reference Manual

Example
This example shows how to rename the Diffserv "admin" class to "system":
D2(rw)->set diffserv class rename admin system

Configuring Diffserv Policies and Assigning Classes

Purpose

To review, create, and configure Diffserv policies and assign classes.

Commands

For information about...

show diffserv policy

set diffserv policy create
set diffserv policy delete
set diffserv policy class
set diffserv policy mark
set diffserv policy police style simple
set diffserv policy police action conform
set diffserv policy police action nonconform
set diffserv policy rename
show diffserv policy
Use this command to display information about Diffserv policies.
Syntax
show diffserv policy {summary | detailed policyname}
Parameters
summary
detailed
policyname
Defaults
None.
Mode
Switch command. Read‐Only.
Displays Diffserv policy summary information.
Displays detailed Diffserv information for a specific policy.
Configuring Diffserv Policies and Assigning Classes
Refer to page...
Enterasys D-Series CLI Reference 10-9
10-9
10-10
10-10
10-11
10-11
10-12
10-13
10-13
10-14