Clear Macauthentication Password; Set Macauthentication Port - Enterasys D-Series Cli Reference Manual

Example
This example shows how to set the MAC authentication password to "macauth":
D2(su)->set macauthentication password macauth

clear macauthentication password

Use this command to clear the MAC authentication password.
Syntax
clear macauthentication password
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the MAC authentication password:
D2(su)->clear macauthentication password

set macauthentication port

Use this command to enable or disable one or more ports for MAC authentication.
Syntax
set macauthentication port {enable | disable} port-string
Parameters
enable | disable
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Enables or disables MAC authentication.
Specifies port(s) on which to enable or disable MAC authentication. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 6‐1.
clear macauthentication password
Enterasys D-Series CLI Reference 17-25