Show Mac Agetime; Show Mac Output Details - Enterasys D-Series Cli Reference Manual

show mac agetime

Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC address information for
D2(su)->show mac port ge.3.1
MAC Address
----------------- ---- ------------- --------
00-09-6B-0F-13-E6 15
MAC Address
----------------- ---- ------------- ------- ------- ---------------------------
01-01-23-34-45-56 20
Table 14‐36 provides an explanation of the command output.
Table 14-36 show mac Output Details
Output Field
MAC Address
FID
Port
Type
VLAN
Status
Egress Ports
show mac agetime
Use this command to display the timeout period for aging learned MAC entries.
Syntax
show mac agetime
Parameters
None.
14-20 Logging and Network Management
FID Port
ge.3.1
VLAN Port
any
What It Displays...
MAC addresses mapped to the port(s) shown.
Filter database identifier.
Port designation.
Address type. Valid types are:
• Learned
• Self
• Management
• Other (this will include any static MAC locked addresses as described in
"Configuring MAC Locking" on page 17-51).
• mcast (multicast)
The VLAN ID configured for the multicast MAC address.
The status of the multicast address.
The ports which have been added to the egress ports list.
ge
Type
Learned
Type Status Egress Ports
mcast perm ge.3.1
.3.1: