Enterasys D-Series Cli Reference Manual page 323

tcpdestport
tcpsourceport
udpdestport
udpsourceport
data
mask mask
port‐string port‐
string
rule‐status active
| not‐in‐service |
not‐ready
storage‐type non‐
volatile | volatile
vlan vlan
drop | forward
dynamic‐pid
dynamic‐pid
cos cos
admin‐pid
admin‐pid
‐verbose
usage‐list
display‐if‐used
Defaults
If verbose is not specified, summary information will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display policy classification information for Ethernet type 2 rules
D2(su)->show policy rule ether
|PID |Rule Type
|02 |Ether
|02 |Ether
|02 |Ether
|02 |Ether
This example shows how to display policy classification information for administrative rule 1
D2(su)->show policy rule admin-pid 1
|Admin|Rule Type
Displays TCP destination port rules.
Displays TCP source port rules.
Displays UDP destination port rules.
Displays UDP source port rules.
Displays rules for a predefined classifier. This value is dependent on the
classification type entered. Refer to Table
classification type.
(Optional) Displays rules for a specific data mask. Refer to Table
valid values for each classification type and data value.
(Optional) Displays rules related to a specific ingress port.
(Optional) Displays rules related to a specific rules status.
(Optional) Displays rules configured for either non‐volatile or volatile
storage.
(Optional) Displays rules for a specific VLAN ID.
Displays rules based on whether matching packets will be dropped or
forwarded.
Displays rules associated with a specific dynamic policy ID.
(Optional) Displays rules for a Class‐of‐Service value.
Displays rules associated with a specific administrative policy ID [1..1023].
(Optional) Displays detailed information.
(Optional) If selected, each ruleʹs usage‐list shall be checked and shall
display only those ports which have applied this rule.
(Optional) Displays rule(s) only if they are applied to at least one port.
|Rule Data
|2048 (0x0800)
|2049 (0x0801)
|2989 (0x0bad)
|33079 (0x8137)
|Rule Data
11‐30 for valid values for each
|Mk|PortStr |RS|ST|VLAN|CoS |U|
|16|All | A|NV|fwrd|
|16|All | A|NV|drop|
|16|All | A|NV|drop|
|16|All | A|NV|drop|
|Mk|PortStr |RS|ST|dPID|aPID|U|
Enterasys D-Series CLI Reference 11-7
show policy rule
11‐30 for
|?|
|?|
|?|
|?|