Configuring Secure Shell (Ssh); Purpose; Commands; Show Ssh Status - Enterasys D-Series Cli Reference Manual

Configuring Secure Shell (SSH)

Configuring Secure Shell (SSH)

Purpose

To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.

Commands

For information about...

show ssh status

set ssh

set ssh hostkey
show ssh status
Use this command to display the current status of SSH on the switch.
Syntax
show ssh status
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SSH status on the switch:
D2(su)->show ssh status
SSH Server status: Disabled
set ssh
Use this command to enable, disable or reinitialize SSH server on the switch. By default, the SSH
server is disabled.
Syntax
set ssh {enable | disable | reinitialize}
17-74 Security Configuration
Refer to page...
17-74
17-74
17-75