Set Igmpsnooping Add-Static - Enterasys D-Series Cli Reference Manual

set igmpsnooping add-static

Defaults
None.
Mode
Switch command, read‐write.
Usage
This timer is for expiring the switch from the multicast database. If the timer expires, and the only
address left is the multicast switch, then the entry will be removed.
Example
This example shows how to set the IGMP multicast router expiration time to infinity:
D2(su)->set igmpsnooping mcrtrexpiretime 0
set igmpsnooping add-static
This command creates a new static IGMP entry or adds one or more new ports to an existing entry.
Syntax
set igmpsnooping add-static group vlan-list [modify] [port-string]
Parameters
group
vlan‐list
modify
port‐string
Defaults
If no ports are specified, all ports are added to the entry.
If modify is not specified, a new entry is created.
Mode
Switch command, read‐write.
Usage
Use this command to create and configure Layer 2 IGMP entries.
Example
This example creates an IGMP entry for the multicast group with IP address of 233.11.22.33
configured on VLAN 20 configured with the port
D2(su)->set igmpsnooping add-static 233.11.22.33 20 ge.1.1
13-6 IGMP Configuration
Specifies the multicast group IP address for the entry.
Specifies the VLANs on which to configure the entry.
(Optional) Adds the specified port or ports to an existing entry.
(Optional) Specifies the port or ports to add to the entry.
.1.1.
ge