set diffserv policy police style simple
Parameters
ipdscp |
ipprecedence
policyname
classname
value
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to mark packets matching the "admin" policy in the "system" class for
DSCP expedited forwarding precedence:
D2(rw)->set diffserv policy mark ipdscp admin system ef
set diffserv policy police style simple
Use this command to establish the policing style for a Diffserv policy based only on bandwidth for
the specified class.
Syntax
set diffserv policy police style simple policyname classname bandwidth burstsize
Parameters
policyname
classname
bandwidth
burstsize
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to configure a bandwidth‐based policing style for the "admin" Diffserv
policy:
D2(rw)->set diffserv policy police style simple admin system 1000 128
10-12 Differentiated Services Configuration
Specifies that packets will be marked with either an IP DSCP or precedence
value.
Specifies the policy name being configured.
Specifies a Diffserv class to associate to this policy.
Specifies an IP DSCP or precedence value. Valid numeric or keyword DCSP
values can be entered as listed in Section
0 ‐ 7.
Specifies the policy name being configured.
Specifies a Diffserv class to associate to this policy.
Specifies a bandwidth value in Kbps. Valid values are 1 ‐ 4294967295.
Specifies a burst size value im Kbytes. Valid values are 1 ‐ 128.
10‐27. Valid precedence values are: