Globally Enabling Or Disabling Diffserv; Purpose; Command; Set Diffserv Adminmode - Enterasys D-Series Cli Reference Manual

Globally Enabling or Disabling Diffserv

Globally Enabling or Disabling Diffserv

Purpose

To globally enable or disable Diffserv on the device.

Command

For information about...

set diffserv adminmode

set diffserv adminmode
Use this command to globally enable or disable Diffserv on the device. By default, this function is
disabled at device startup.
Syntax
set diffserv adminmode {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable Diffserv:
D2(rw)->set diffserv adminmode enable
10-2 Differentiated Services Configuration
Enables or disables Diffserv.
Refer to page...
10‐2