3Com Router 3000 Ethernet Family
Configuration Guide
Chapter 3 v2.4x Basic Configurations
3.1.1 Entering/Exiting System View
When logging onto the router from the console port, you enter user view and see the
prompt <3Com> on the screen. To enter or exit system view, use the following
commands.
Table 3-1 Enter/exit system view
Enter system view from user view.
Return to user view from system view.
Return to user view from any other view.
With the quit command, you can return to the previous view or exit the system from
user view. The hot key <Ctrl+Z> is equivalent to the return command.
3.1.2 Configuring the Router Name
The command prompt contains a router name that can be configured as needed.
Perform the following command in system view.
Table 3-2 Configure the router name
Configure the router name
3.1.3 Configuring the System Clock
Perform the following configuration in system view.
Table 3-3 Configure system clock
Operation
Set the standard time.
Set the time zone.
Cancel the time zone
setting.
Operation
Operation
clock datetime time date
clock timezone time-zone-name { add | minus } time
undo clock timezone
3Com Corporation
Chapter 3 v2.4x Basic Configurations
system-view
Quit
Return
Command
sysname sysname
Command
3-1
Command