3Com 3C13636 Configuration Manual page 140

3Com Router 3000 Ethernet Family
Configuration Guide
I. Configuring transmission speed
Table 6-3 Configure transmission speed
Set a transmission speed
Restore the default transmission speed
Asynchronous serial interfaces support the transmission at the speed of
300 bps
600 bps
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
4096000 bps
The transmission rate of an asynchronous interface defaults to 9600 bps. But the
transmission rate depends on interface type. For example, the rate at a Console port
can only be 115200 bps, but not 4096000 bps.
II. Configuring flow control mode
Table 6-4 Configure flow control mode
Configure a flow control mode
Restore the default flow control mode
By default, TTY interfaces use hardware flow control.
The following are descriptions of the parameters.
none: No flow control
software: Software flow control
hardware: Hardware flow control, which is only effective for console port , AUX port,
and serial port in asynchronous mode
Operation
Operation
3Com Corporation
6-4
Chapter 6 User Interface Configuration
Command
speed speed-value
undo speed
Command
flow-control { none | software |
hardware }
undo flow-control