3Com 3C13636 Configuration Manual page 58

3Com Router 3000 Ethernet Family
Configuration Guide
III. Configuration procedure
1) Configure R1 at the center
# Configure controller interface.
[3Com] controller e1 0/0/0
[3Com-e1 0/0/0] using e1
# Configure e1 interface to originate interface serial 0/0/0 and assign the IP address to
the peer.
[3Com] ip pool 1 192.10.1.1
[3Com] interface serial0/0/0
[3Com-serial0/0/0] link-protocol ppp
[3Com-serial0/0/0] ip address 192.10.1.2 255.255.255.0
[3Com-serial0/0/0] remote address pool 1
# FTP the configuration file to the remote router
<3Com > ftp 192.10.1.1
[ftp] put 3ComR2.cfg configv 2.41cfg.cfg
Here v 2.41cfg.cfg is the default name of the configuration file on router.
2) Configure R2
R2 starts and runs the auto-config function automatically, generating the following
configuration:
ftp server enable
local-user admin password cipher admin
service-type telnet terminal
level 3
service-type ftp
controller e1 0/0/0
using e1
interface serial 0/0/0
link-protocol ppp
ip address ppp-negotiate
-negotiate
gotiate
iate
e
-negotiate
gotiate
iate
e
user-interface vty 0 4
authentication-mode scheme
Chapter 2 System Maintenance Management
3Com Corporation
2-10