3Com 3C13636 Configuration Manual page 94

3Com Router 3000 Ethernet Family
Configuration Guide
Following are the parameters included in an HWPing test group:
Destination address
Destination port
Source interface
Source address
Source port
Test type
Number of packets sent for a test
ICMP datagram size
Packet transmission interval
Test timeout time
Time to Live (TTL) value
Service type
Packet stuffing character
HTTP operation type
HTTP URL
FTP operation type
FTP operation username
FTP operation password
FTP operation file name
The maximum number of retained history records
Test description
1) Configuring a destination address
Destination address is the IP address of HWPing Server, which is equal to the
destination address in a ping command. It must be the IP address where TCP or UDP
listening service has been configured.
Perform the following configurations in HWPing test group view.
Table 4-5 Configure a destination address
Configure a destination address.
Delete the destination address.
By default, no destination address is configured.
2) Configuring destination port
You must specify the port number of HWPing Server when making a TCP or UDP test.
The port number must be the number of the port on which TCP or UDP listening service
has been configured.
Perform the following configurations in HWPing test group view.
Operation
3Com Corporation
4-4
Chapter 4 HWPing Configurations
Command
destination-ip ipaddress
undo destination-ip