3Com 3C13636 Configuration Manual page 233

3Com Router 3000 Ethernet Family
Configuration Guide
Delete a file from the SFTP server
V. Specifying a source interface/IP address for the SFTP client
Perform the following configuration in system view.
Table 11-42 Specify a source interface or source IP address for the SFTP client
Specify a source interface for the SFTP
client
Delete the source interface specified for
the SFTP client
Specify a source IP address for the
packets sent by the SFTP client
Delete the source IP address for the
packets sent by the SFTP client
By default, the source IP address in each packet sent by the SFTP client is the IP
address of the interface where the packet is sent out.
Note:
You may specify a source IP address for the packets sent by the Telnet server with the
sftp source-interface command or with the sftp source-ip command. If both
commands are configured, the one configured later overrides.
VI. Displaying help information
Execute the following command in SFTP client view to get help information about SFTP
client commands.
Table 11-43 Display help information about SFTP client commands
Display help information about SFTP
client commands
Operation
Operation
Operation
3Com Corporation
11-36
Chapter 11 Terminal Services
Command
delete remote-file
remove remote-file
Command
sftp source-interface
interface-number
undo sftp source-interface
sftp source-ip ip-address
undo sftp source-ip
Command
help [ command-name ]
interface-type