3Com 3C13636 Configuration Manual page 33

3Com Router 3000 Ethernet Family
Configuration Guide
By default, the command alias function is disabled.
II. Mapping an alias with a command
Perform the following configuration in system view.
Table 2-13 Map an alias with a command keyword
Map an alias with a command
keyword.
Cancel the map.
By default, no command alias is configured.
III. Displaying and Debugging
Perform the following configuration in any view.
Table 2-14 Display and debug
Display the current alias settings.
Operation
Operation
3Com Corporation
Chapter 2 User Configuration Interface
Command
command-alias mapping cmdkey alias
undo command-alias mapping alias
display command-alias
2-22
Command