3Com 3C13636 Configuration Manual page 108

3Com Router 3000 Ethernet Family
Configuration Guide
II. Configuration procedure
Note:
Steps 1 through 6 and step 9 are required for an FTP test and the remaining three steps
are optional.
# Configure the IP address of the Ethernet interface.
[router] interface Ethernet 0/0/0
[router-Ethernet0/0/0 ] ip address 169.254.0.1 16
# Enable HWPing Client.
[router] hwping-agent enable
# Step 1: Create an HWPing test group, given an administrator name "administrator"
and a test operations tag "ftp".
[router] hwping administrator ftp
# Step 2: Set the test type to FTP.
[router-hwping-administrator-ftp] test-type ftp
# Step 3: Configure the IP address of an FTP server, 169.254.10.2 for example.
[router-hwping-administrator-ftp] destination-ip 169.254.10.2
# Step 4: Configure the username.
[router-hwping-administrator-ftp] username administrator
# Step 5: Configure a password.
[router-hwping-administrator-ftp] password hwping
# Step 6: Configure name of the file to be gotten.
[router-hwping-administrator-ftp] filename config.txt
# Step 7: Configure the maximum number of tests.
[router-hwping-administrator-ftp] count 10
# Step 8: Configure a test timeout time.
[router-hwping-administrator-ftp] timeout 30
# Step 9: Configure the source address.
[router-hwping-administrator-ftp] source-ip 169.354.0.1
# Step 10: Enable a test.
[router-hwping-administrator-ftp] test-enable
# Step 11: View the test result.
3Com Corporation
4-18
Chapter 4 HWPing Configurations