3Com 3C13636 Configuration Manual page 114

Router 3000 ethernet family

Hide thumbs Also See for 3C13636:

Table of Contents

3Com Router 3000 Ethernet Family

Configuration Guide

# Enable HWPing Client.

[router] hwping-agent enable

# Step 1: Create an HWPing test group, setting administrator name to administrator

and test operation tag to udpprivate.

[router] Hwping administrator udpprivate

# Step 2: Set the test type to UDP-private.

[router-hwping-administrator-udpprivate] test-type udpprivate

# Step 3: Configure the IP address of an HWPing server, 169.254.10.2 for example.

[router-hwping-administrator-udpprivate] destination-ip 169.254.10.2

# Step 4: Configure a destination port.

[router-hwping-administrator-udpprivate] destination-port 9000

# Step 5: Configure the number of transmitted test packets.

[router-hwping-administrator-udpprivate] count 10

# Step 6: Configure a test timeout time.

[router-hwping-administrator-udpprivate] timeout 3

# Step 7: Enable a test.

[router-hwping-administrator-udpprivate] test-enable

# Step 8: View the test result.

[router] display hwping result administrator udpprivate

[router] display hwping history administrator udpprivate

At the destination end, you must perform the following configurations:

[router] hwping-server enable

[router] hwping-server udpecho 169.254.10.2 9000

The address and port number configured using the hwping-server udpecho

command on the HWPing server must be the same IP address and port number

configured in steps 3 and 4 described above.

3Com Corporation

Chapter 4 HWPing Configurations

Chapters

Table of Contents

3c13636-us - router 3036 3000 series