3Com 3C13636 Configuration Manual page 220

3Com Router 3000 Ethernet Family
Configuration Guide
Remove the association of a public key to an
SSH user
X. Configuring a service type for an SSH user
Perform the following configuration in system view to configure a service type for an
SSH user.
Table 11-25 Configure a service type for an SSH user
Configure a service type for an SSH user
Restore the default service type for an
SSH user
The default service type for an SSH user is stelnet.
XI. Setting SSH version compatibility
Perform the following configuration in system view to enable/disable the SSH server to
work with SSH1.X clients.
Table 11-26 Enable/disable the SSH server to work with SSH1.X clients
Enable the SSH server to work with
SSH1.X clients
Disable the SSH server to work with
SSH1.X clients
By default, the SSH server works with SSH1.X clients.
XII. Specifying a source interface/IP address for the SSH server
Perform the following configuration in system view.
Table 11-27 Specify a source interface or source IP address for the SSH server
Specify a source interface for the SSH
server
Delete the source interface specified for
the SSH server
Specify a source IP address for the
packets sent by the SSH server
Operation
Operation
Operation
3Com Corporation
11-23
Chapter 11 Terminal Services
undo ssh user username assign
rsa-key
Command
ssh user username
{ stelnet | sftp | all }
undo ssh user username service-type
Command
ssh server compatible_ssh1x enable
undo ssh server compatible_ssh1x
Command
ssh-server
interface-type interface-number
undo ssh-server source-interface
ssh-server source-ip ip-address
service-type
source-interface