3Com Router 3000 Ethernet Family
Configuration Guide
Display clipboard information.
Display the current status of the memory
in the system.
Display statistics about CPU usage.
Set the CPU usage statistic interval.
Display the history of the CPU usage
statistics in graphics.
When troubleshooting or servicing the system, you can use the display
diagnostic-information command to collect operating information about active
modules in the system.
The display diagnostic-information command can at a stroke collect the information
displayed at the terminal after executing the commands such as display clock,
display version, vrbd, display device, display current-configuration, display
saved-configuration, display interface, display controller, display ip interface,
display ip statistics, display exception, display logbuffer, and display history all.
Operation
3Com Corporation
3-5
Chapter 3 v2.4x Basic Configurations
Command
display clipboard
display memory
display cpu-usage [ configuration |
number
[
offset
]
[ from-device ] ]
cpu-usage cycle { 5sec | 1min | 5min |
72min } [ slave | slot slot-num ]
display cpu-usage history [ task
task-id ] [ slave | slot slot-num ]
[
verbose
]