3Com 3C13636 Configuration Manual page 83

Router 3000 ethernet family

Hide thumbs Also See for 3C13636:

Table of Contents

3Com Router 3000 Ethernet Family

Configuration Guide

II. Network diagram

Ethernet 1/0/1:

Ethernet 2/0/1:

Figure 3-1 Network diagram for basic auto detect configurations

III. Configuration procedure

Configure Router A:

# Enter system view.

<3Com> system-view

# Create a detect group numbered 10 and enter its view.

[3Com] detect-group 10

# Add IP address 10.1.1.4 with sequence number 1 to the detect group, taking

192.168.1.2 as the next hop IP address.

[3Com-detect-group-10] detect-list 1 ip address 10.1.1.4 nexthop 192.168.1.2

# Add IP address 192.168.2.2 with sequence number 2 to the detect group.

[3Com-detect-group-10] detect-list 2 ip address 192.168.2.2

# Specify the relationship between the two addresses in the detect group as logical OR.

[3Com-detect-group-10] option or

# Set the auto detect interval to 60 seconds.

[3Com-detect-group-10] timer loop 60

# Set the maximum number of probing retries during each auto detect interval to 3.

[3Com-detect-group-10] retry 3

# Set the timeout period of a probing attempt to 3 seconds.

[3Com-detect-group-10] timer wait 3

[3Com-detect-group-10] quit

# Display the configurations of detect group 10.

[3Com] display detect-group 10

192.168.1.2/24

192.168.2.2/24

3Com Corporation

Chapter 3 Auto Detect Configuration

Chapters

Table of Contents

3c13636-us - router 3036 3000 series