3Com 3C13636 Configuration Manual page 143

3Com Router 3000 Ethernet Family
Configuration Guide
Table 6-10 Configure user interface locking function
Lock user interface.
# For example, you have accessed the router via VTY1, and you lock the user-interface
vty 1 now because you will leave for a while.
<3Com> lock
Password: xxxx
Again: xxxx
IV. Setting screen-length of terminal screen
Table 6-11 Set screen-length of terminal screen
Set screen-length of terminal screen
Restore the default screen-length of
terminal screen
By default, the full screen-length of terminal screen is 24 lines.
screen-length 0 disables screen split.
undo screen-length restores the default setting.
V. Setting the size of the history command buffer
Table 6-12 Set the size of the buffer for the history command
Set the size of the buffer for the history
commands
Restore the default size of the buffer for
the history commands
The parameter size-value is the history command buffer size which defaults to 10, that
is, the buffer is allowed to restore a maximum of ten history commands.
VI. Enabling message transfer between user interfaces
You may configure the router to transfer messages between user interfaces.
Operation
Operation
Operation
3Com Corporation
6-7
Chapter 6 User Interface Configuration
Command
lock
Command
screen-length screen-length
undo screen-length
Command
history-command max-size size-value
undo history-command max-size