3Com 3C13636 Configuration Manual page 70

3Com Router 3000 Ethernet Family
Configuration Guide
Caution:
When there are multiple Telnet users or terminal server users at the same time, they
can share some configuration parameters, including the setting of filtering by module,
language selection, and the severity threshold. The changes that one user made on
these settings will also be shown on other users' terminals.
V. Information output
By far, the information center of router's main software can output the information to
seven directions.
Output information to a local Console via the Console port.
Output information to a remote Telnet terminal in support of remote maintenance.
Allocate a logbuffer of proper size inside the router for recording information.
Configure the loghost, to which the information center will directly send information
and on which information will be stored in files for future retrieval.
Allocate a trapbuffer of proper size inside the router for recording information.
Output information to the SNMP Agent.
Output information to the log file.
Each output direction will be specified with a desired channel by using a configuration
command and all the information will be sent to the associated directions after being
filtered by the specified channels. By configuring the channel for each output direction
and the filtering information of the channel as required, the user could complete the
filtration and redirection of different types of the information.
Perform the following operations in system view.
Table 2-21 Output information
Output information to the console
Disable the information center to output
information to the console
Output information to a telnet terminal or
a terminal server
Disable the information center to output
information to Telnet terminals
Output information to SNMP
Disable the information center to output
information to SNMP
Operation
3Com Corporation
2-22
Chapter 2 System Maintenance Management
Command
info-center console
{ channel-number | channel-name }
undo info-center console channel
info-center monitor
{ channel-number | channel-name }
undo info-center monitor channel
info-center snmp
{ channel-number | channel-name }
undo info-center snmp channel
channel
channel
channel